CONTROL: FANUC 18IM (SEICOS 18M)
PALLET SIZE / NUMBER OF PALLETS: 19.7" X 19.7" / 2 PLTS.
TRAVELS:
--X: 28.6"
--Y: 28.6"
--Z: 28.6"
B: 1 DEGREE
SPINDLE NOSE: CAT #40 TAPER
SPINDLE SPEED: 60 - 14,000 RPM
SPINDLE MOTOR: 33 HP
TOOL MAGAZINE CAPACITY: 60 STATION ATC
TOOL TO TOOL CHANGE TIME: 1 SEC
CHIP TO CHIP CHANGE TIME: 3.2 SEC
MAX TABLE LOAD: 1,102 LBS
PALLET CHANGE TIME WITH LOAD: 6 SEC
MACHINE WEIGHT: 23,100 LBS.


Mori Seiki / Hitech recently announced the latest in its line-up of machines-the HS5000 Horizontal Machining Center. According to Hitech, the HS5000 is suited to form the core of a 24 hours a day, 7
ays a week production system.

The HS5000 is equipped with the SEICOS • Fanuc 18M CNC control.

"The HS5000's 30HP peak Direct Drive Spindle (DDS) accelerates from 0 to 14,000 RPM in 1.4 seconds," said a Hitech spokesperson. "High axis acceleration rates along with one-second tool-to-tool time
ield a chip-to-chip time of 3.2 seconds. Changing the 19.7" square pallets takes six seconds even when loaded with the maximum payload of 1,102 lbs."

With the HS5000, chips are moved so the machine can run without stopping to clear chips from the work area. The machining center provides chip disposal with the triple trough construction using a cen
er conveyor that moves the bulk of the chips with the remainder removed by dual spiral chip conveyors. The spiral chip conveyors, positioned at the outer edge of the machining area, extend to the set
p station for added chip removal convenience.

Maintenance for the HS5000 has been made easier over previous models. Lubricant consumption is kept low by utilizing oil-free roller guides and an oil-bath ATC. "The MTTR (Mean Time To Repair), an in
ex of machine maintainability, has also been reduced, as well as machine downtime, with the enhanced accessibility of components in the machine construction," said the spokesperson

https://youtu.be/j7RsPT_SfWA

<iframe width="530" height="390" src="//www.youtube.com/embed/j7RsPT_SfWA" frameborder="0" allowfullscreen></iframe>

https://youtu.be/mrReebRJ-zE

<iframe width="530" height="390" src="//www.youtube.com/embed/mrReebRJ-zE" frameborder="0" allowfullscreen></iframe>

https://youtu.be/olHvvfkBpDQ

<iframe width="530" height="390" src="//www.youtube.com/embed/olHvvfkBpDQ" frameborder="0" allowfullscreen></iframe>

https://youtu.be/hK3IfwEXn6o

<iframe width="530" height="390" src="//www.youtube.com/embed/hK3IfwEXn6o" frameborder="0" allowfullscreen></iframe>
220 PSI COOLANT THROUGH THE SPINDLE
HELICAL INTERPOLATION
SPINDLE CHILLER
RIGID TAPPING
CHIP CONVEYOR
2 PALLET CHANGER
CONTROL: FANUC 18M CNC

Machinery Resources Int'l Inc
1650 Voyager Ave Simi Valley CA 93063
Tel: 877-568-2121 Fax: 818-346-7986
Email (Request Quote): inquiries@machineryresources.com
Web: www.machineryresources.com